Diffraction response of photorefractive polymers over nine orders of magnitude of pulse duration.
Norwood, Robert A
AffiliationUniv Arizona, Coll Opt Sci
MetadataShow full item record
PublisherNATURE PUBLISHING GROUP
CitationDiffraction response of photorefractive polymers over nine orders of magnitude of pulse duration. 2016, 6:29027 Sci Rep
RightsThis work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
Collection InformationThis item from the UA Faculty Publications collection is made available by the University of Arizona with support from the University of Arizona Libraries. If you have questions, please contact us at email@example.com.
AbstractThe development of a single mode fiber-based pulsed laser with variable pulse duration, energy, and repetition rate has enabled the characterization of photorefractive polymer (PRP) in a previously inaccessible regime located between millisecond and microsecond single pulse illumination. With the addition of CW and nanosecond pulse lasers, four wave mixing measurements covering 9 orders of magnitudes in pulse duration are reported. Reciprocity failure of the diffraction efficiency according to the pulse duration for a constant energy density is observed and attributed to multiple excitation, transport and trapping events of the charge carriers. However, for pulses shorter than 30 μs, the efficiency reaches a plateau where an increase in energy density no longer affects the efficiency. This plateau is due to the saturation of the charge generation at high peak power given the limited number of sensitizer sites. The same behavior is observed in two different types of devices composed of the same material but with or without a buffer layer covering one electrode, which confirm the origin of these mechanisms. This new type of measurement is especially important to optimize PRP for applications using short pulse duration.
NoteOpen Access Journal
VersionFinal published version
SponsorsAFOSR [FA9550-10-1-0207]; National Science Foundation through CIAN NSF ERC [EEC-0812072]; Office of Naval Research [N00014-14-1-0505]
CollectionsUA Faculty Publications
- High-Power fiber amplifier with widely tunable repetition rate, fixed pulse duration, and multiple output wavelengths.
- Authors: Schrader PE, Farrow RL, Kliner DA, Fève JP, Landru N
- Issue date: 2006 Nov 27
- High-power pulsed diode-pumped Er:ZBLAN fiber laser.
- Authors: Gorjan M, Petkovšek R, Marinček M, Čopič M
- Issue date: 2011 May 15
- 50-mJ macro-pulses at 1064 nm from a diode-pumped picosecond laser system.
- Authors: Agnesi A, Carrà L, Dallocchio P, Pirzio F, Reali G, Lodo S, Piccinno G
- Issue date: 2011 Oct 10
- Graphene based widely-tunable and singly-polarized pulse generation with random fiber lasers.
- Authors: Yao BC, Rao YJ, Wang ZN, Wu Y, Zhou JH, Wu H, Fan MQ, Cao XL, Zhang WL, Chen YF, Li YR, Churkin D, Turitsyn S, Wong CW
- Issue date: 2015 Dec 21
- All-fiber high-average power nanosecond-pulsed master-oscillator power amplifier at 2 μm with mJ-level pulse energy.
- Authors: Wang X, Jin X, Zhou P, Wang X, Xiao H, Liu Z
- Issue date: 2016 Mar 10