Persistent Link:
http://hdl.handle.net/10150/615231
Title:
Advanced Joint Test Assembly (JTA) Telemetry System
Author:
Stimmell, K. G.
Affiliation:
Sandia National Laboratory
Issue Date:
1987-10
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
We design telemetry systems which instrument weapons in the Joint DoD/DOE flight test program. These telemetry systems gather data which can be used to determine if a weapon functioned as intended. Traditionally, a telemetry system has been designed to fit the individual requirements of each of the many weapons which have gone into production. The process of defining requirements, designing the system, and getting it into production with the quality assurance demanded of all weapon components takes considerable time, manpower, and money. Due to the rapid advancement of electronics and computer technology, these telemetry systems and their production testers become difficult to support if the weapon service time is extended or if aging test equipment breaks down. We are designing a telemetry system to support new programs for the next decade and to replace old telemetry systems which can no longer be produced. This multi-system Joint Test Assembly (JTA) is being designed to be modular, flexible, and testable. New techniques for increasing reliability, such as redundancy, error detection and correction, and microprocessor recovery will be employed. The requirements for each program can be met by choosing the necessary circuitry from a "shopping list" and packaging to meet the mechanical constraints for each system. Production specifications and test equipment will be in place to support any telemetry which is composed of the previously-designed modules. Modifications of hardware and software to support individual requirements will be kept to a minimum. We expect this new approach to telemetry system development to significantly reduce cost and lead time for every program on which it is employed. The use of this telemetry system on multiple programs should also enhance reliability.
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleAdvanced Joint Test Assembly (JTA) Telemetry Systemen_US
dc.contributor.authorStimmell, K. G.en
dc.contributor.departmentSandia National Laboratoryen
dc.date.issued1987-10-
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractWe design telemetry systems which instrument weapons in the Joint DoD/DOE flight test program. These telemetry systems gather data which can be used to determine if a weapon functioned as intended. Traditionally, a telemetry system has been designed to fit the individual requirements of each of the many weapons which have gone into production. The process of defining requirements, designing the system, and getting it into production with the quality assurance demanded of all weapon components takes considerable time, manpower, and money. Due to the rapid advancement of electronics and computer technology, these telemetry systems and their production testers become difficult to support if the weapon service time is extended or if aging test equipment breaks down. We are designing a telemetry system to support new programs for the next decade and to replace old telemetry systems which can no longer be produced. This multi-system Joint Test Assembly (JTA) is being designed to be modular, flexible, and testable. New techniques for increasing reliability, such as redundancy, error detection and correction, and microprocessor recovery will be employed. The requirements for each program can be met by choosing the necessary circuitry from a "shopping list" and packaging to meet the mechanical constraints for each system. Production specifications and test equipment will be in place to support any telemetry which is composed of the previously-designed modules. Modifications of hardware and software to support individual requirements will be kept to a minimum. We expect this new approach to telemetry system development to significantly reduce cost and lead time for every program on which it is employed. The use of this telemetry system on multiple programs should also enhance reliability.en
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123-
dc.identifier.issn0074-9079-
dc.identifier.urihttp://hdl.handle.net/10150/615231-
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.