Persistent Link:
http://hdl.handle.net/10150/613495
Title:
AUTOMATIC ADDRESSING OF TELEMETRY CHANNELS
Author:
Lucero, L. A.
Affiliation:
Sandia National Laboratories
Issue Date:
1982-09
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
To simplify telemetry software development, a design that elminates the use of software instructions to address telemetry channels is being implemented in our telemetry systems. By using the DMA function of the RCA 1802 microprocessor, once initialized, addressing of telemetry channels is automatic, requiring no software. In this report, the automatic addressing scheme is compared with an earlier technique that uses software to address telemetry channels. In comparison, the automatic addressing scheme effectively increases the software capability of the microprocessor, simplifies telemetry dataset encoding, eases data set changes, and may decrease the electronic hardware count. The software addressing technique uses at least three instructions to address each channel. The automatic addressing technique requires no software instructions. Instead, addressing is performed using a direct memory access cycle stealing technique. Application of an early version of this addressing scheme opened up the capability to execute 400 more microprocessor instructions than could be executed using the software addressing scheme. The present version of the automatic addressing scheme uses a section of PROM reserved for telemetry channel addresses. Encoding for a dataset is accomplished by programming the PROM with channel addresses in the order they are to be monitored. Software for one of our telemetry units was written using the software addressing scheme, then rewritten using the automatic addressing scheme. While 1000 bytes of memory were required by the software addressing scheme, the automatic addressing scheme required only 396 bytes. A number of prototypes using AATC have been built and tested in a telemetry lab unit. All have worked successfully.
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleAUTOMATIC ADDRESSING OF TELEMETRY CHANNELSen_US
dc.contributor.authorLucero, L. A.en
dc.contributor.departmentSandia National Laboratoriesen
dc.date.issued1982-09-
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractTo simplify telemetry software development, a design that elminates the use of software instructions to address telemetry channels is being implemented in our telemetry systems. By using the DMA function of the RCA 1802 microprocessor, once initialized, addressing of telemetry channels is automatic, requiring no software. In this report, the automatic addressing scheme is compared with an earlier technique that uses software to address telemetry channels. In comparison, the automatic addressing scheme effectively increases the software capability of the microprocessor, simplifies telemetry dataset encoding, eases data set changes, and may decrease the electronic hardware count. The software addressing technique uses at least three instructions to address each channel. The automatic addressing technique requires no software instructions. Instead, addressing is performed using a direct memory access cycle stealing technique. Application of an early version of this addressing scheme opened up the capability to execute 400 more microprocessor instructions than could be executed using the software addressing scheme. The present version of the automatic addressing scheme uses a section of PROM reserved for telemetry channel addresses. Encoding for a dataset is accomplished by programming the PROM with channel addresses in the order they are to be monitored. Software for one of our telemetry units was written using the software addressing scheme, then rewritten using the automatic addressing scheme. While 1000 bytes of memory were required by the software addressing scheme, the automatic addressing scheme required only 396 bytes. A number of prototypes using AATC have been built and tested in a telemetry lab unit. All have worked successfully.en
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123-
dc.identifier.issn0074-9079-
dc.identifier.urihttp://hdl.handle.net/10150/613495-
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.