Persistent Link:
http://hdl.handle.net/10150/612871
Title:
MIL-STD-1553 INTERFACES TO TELEMETRY SYSTEMS
Author:
Nicolais, Ray; Ellis, Donald H.
Affiliation:
AEROSYSTEMS ASSOCIATES; AYDIN VECTOR Division
Issue Date:
1982-09
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
With the advent of digital technology in aircraft systems, the need for advancements in digital data acquisition systems for flight testing became apparent. A thorough review of aircraft systems integration employing the MIL-STD-1553 multiplex data bus revealed the need for flight test systems that incorporate the advanced digital techniques and provide an interface to the data bus. This paper provides an overview of the MIL-STD-1553 requirements including word structure and protocol, with special emphasis on the requirements for synchronization and time tagging of the data acquired from the bus. The data bus is a serial digital transmission system for interchange of control signals, status and data between equipment internal to the aircraft (or other vehicle). The basic multiplexing technique is Time Division Multiplexing (TDM) with the information coded in 20-bit (16-bit data) words. The transmitted waveform is biphase operating at a bit rate of 1.0 megabit per second. Transmissions are bi-directional on a twisted pair shielded cable. The requirements for a bus monitor unit which interfaces with the data bus for acquisition and processing of information are described. The design for a Programmable Bus Monitor (PBM) is detailed. The PBM provides a highly flexible and effective interface between the MIL-STD-1553 data bus and an advanced digital flight test system.
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleMIL-STD-1553 INTERFACES TO TELEMETRY SYSTEMSen_US
dc.contributor.authorNicolais, Rayen
dc.contributor.authorEllis, Donald H.en
dc.contributor.departmentAEROSYSTEMS ASSOCIATESen
dc.contributor.departmentAYDIN VECTOR Divisionen
dc.date.issued1982-09-
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractWith the advent of digital technology in aircraft systems, the need for advancements in digital data acquisition systems for flight testing became apparent. A thorough review of aircraft systems integration employing the MIL-STD-1553 multiplex data bus revealed the need for flight test systems that incorporate the advanced digital techniques and provide an interface to the data bus. This paper provides an overview of the MIL-STD-1553 requirements including word structure and protocol, with special emphasis on the requirements for synchronization and time tagging of the data acquired from the bus. The data bus is a serial digital transmission system for interchange of control signals, status and data between equipment internal to the aircraft (or other vehicle). The basic multiplexing technique is Time Division Multiplexing (TDM) with the information coded in 20-bit (16-bit data) words. The transmitted waveform is biphase operating at a bit rate of 1.0 megabit per second. Transmissions are bi-directional on a twisted pair shielded cable. The requirements for a bus monitor unit which interfaces with the data bus for acquisition and processing of information are described. The design for a Programmable Bus Monitor (PBM) is detailed. The PBM provides a highly flexible and effective interface between the MIL-STD-1553 data bus and an advanced digital flight test system.en
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123-
dc.identifier.issn0074-9079-
dc.identifier.urihttp://hdl.handle.net/10150/612871-
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.