Persistent Link:
http://hdl.handle.net/10150/612845
Title:
AIAA DESIGN BUILD FLY COMPETITON
Author:
DECKER, KENNETH HARRISON
Issue Date:
2016
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
This project analyzes the challenges that distributed manufacturing pose to solving modern engineering challenges. The goal of the project is to build a Production plane that can complete an obstacle course carrying a 32 oz. Gatorade bottle payload. The Production plane must be broken down into multiple sub-assembles that are then carried by a Support plane through the same course. This project is for the AIAA Design Build Fly Competition, so the conceptual design phase is dominated by score optimization. The Production plane will break down into two subcomponents that can then fit in the back of the Support Plane fuselage. The production plane will be constructed using carbon fiber for improved durability. The Support plane will be constructed of wood to reduce cost. Due to lack of funding, the planes could not complete in the competition. However, extensive ground testing and analysis indicates that both planes satisfy all major competition performance requirements.
Type:
text; Electronic Thesis
Degree Name:
B.S.
Degree Level:
Bachelors
Degree Program:
Honors College; Aerospace Engineering
Degree Grantor:
University of Arizona
Advisor:
Shkarayev, Sergey

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleAIAA DESIGN BUILD FLY COMPETITONen_US
dc.creatorDECKER, KENNETH HARRISONen
dc.contributor.authorDECKER, KENNETH HARRISONen
dc.date.issued2016-
dc.publisherThe University of Arizona.en
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en
dc.description.abstractThis project analyzes the challenges that distributed manufacturing pose to solving modern engineering challenges. The goal of the project is to build a Production plane that can complete an obstacle course carrying a 32 oz. Gatorade bottle payload. The Production plane must be broken down into multiple sub-assembles that are then carried by a Support plane through the same course. This project is for the AIAA Design Build Fly Competition, so the conceptual design phase is dominated by score optimization. The Production plane will break down into two subcomponents that can then fit in the back of the Support Plane fuselage. The production plane will be constructed using carbon fiber for improved durability. The Support plane will be constructed of wood to reduce cost. Due to lack of funding, the planes could not complete in the competition. However, extensive ground testing and analysis indicates that both planes satisfy all major competition performance requirements.en
dc.typetexten
dc.typeElectronic Thesisen
thesis.degree.nameB.S.en
thesis.degree.levelBachelorsen
thesis.degree.disciplineHonors Collegeen
thesis.degree.disciplineAerospace Engineeringen
thesis.degree.grantorUniversity of Arizonaen
dc.contributor.advisorShkarayev, Sergeyen
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.