Persistent Link:
http://hdl.handle.net/10150/607572
Title:
RS-485 BASED MEASUREMENT SYSTEM WITH SCPI COMMAND SET CONTROLLED BY HP-VEE APPLICATION
Author:
Zareba, Grzegorz
Affiliation:
University of Arizona
Issue Date:
2001-10
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
This article presents a measurement system based on the RS-485 interface. The presented system is an alternative solution for distributed measurement systems, which cannot be built using IEEE-488 interface due to distance limitation between elements of the system. The RS-485 interface is a base for communication between measurement instruments and uses a Master-Slave protocol to exchange data between them. One dedicated master device, usually a PC, controls all slave devices connected to the interface. To control measurement devices SCPI language is used. This solution simplifies communication between measurement devices and allows utilizing the HP-VEE environment to control any SCPI devices connected to the RS-485 network.
Keywords:
RS-485 Interface; Bus Networks; SCPI Language; IEEE-488 Interface; HP-VEE Environment; ModBUS Protocol
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleRS-485 BASED MEASUREMENT SYSTEM WITH SCPI COMMAND SET CONTROLLED BY HP-VEE APPLICATIONen_US
dc.contributor.authorZareba, Grzegorzen
dc.contributor.departmentUniversity of Arizonaen
dc.date.issued2001-10en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractThis article presents a measurement system based on the RS-485 interface. The presented system is an alternative solution for distributed measurement systems, which cannot be built using IEEE-488 interface due to distance limitation between elements of the system. The RS-485 interface is a base for communication between measurement instruments and uses a Master-Slave protocol to exchange data between them. One dedicated master device, usually a PC, controls all slave devices connected to the interface. To control measurement devices SCPI language is used. This solution simplifies communication between measurement devices and allows utilizing the HP-VEE environment to control any SCPI devices connected to the RS-485 network.en
dc.subjectRS-485 Interfaceen
dc.subjectBus Networksen
dc.subjectSCPI Languageen
dc.subjectIEEE-488 Interfaceen
dc.subjectHP-VEE Environmenten
dc.subjectModBUS Protocolen
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/607572en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.