Persistent Link:
http://hdl.handle.net/10150/607391
Title:
TELEMETRY TRANSMISSION USING INVERSE MULTIPLEXING AND ASYNCHRONOUS TRANSFER MODE (ATM)
Author:
Eslinger, Brian; McCombe, Joleen
Affiliation:
Edwards Air Force Base
Issue Date:
1997-10
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
The growing need to transmit larger telemetry streams from the receiving site to the processor location over greater distances is requiring newer and more creative techniques. This paper reports efforts to use Asynchronous Transfer Mode (ATM) technology and inverse multiplexing to provide an economical system to interface telemetry streams into the public network for reliable transmission. Cost savings are available immediately for programs that are willing to meet the synchronization criteria today. Lab testing has shown the feasibility of using cost efficient techniques for data transmission. This document describes the investigation that is currently underway that could provide a significant change to the way telemetry data is transmitted from receiver sites to data processing sites. Instead of using dedicated lines with dedicated bandwidth regardless of the program being supported, the approach that has been tested in a lab environment would allow the dynamic allocation of bandwidth using ATM over a variety of carrier services. The combination of ATM and inverse multiplexing allows telemetry data rates above 1.5 Megabits per second (Mbps) to be transmitted over multiple T1 (1.544 Mbps) lines. Previously, the only choice when data rates exceeded 1.5 Mbps was to use an entire DS-3 (45 Mbps). Now it is possible to transmit intermediate sized data rates (1.5 to 8 Mbps) by bonding multiple T1s to provide the desired data throughput.
Keywords:
ATM; Telemetry; Inverse Multiplexing; Flight Test
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleTELEMETRY TRANSMISSION USING INVERSE MULTIPLEXING AND ASYNCHRONOUS TRANSFER MODE (ATM)en_US
dc.contributor.authorEslinger, Brianen
dc.contributor.authorMcCombe, Joleenen
dc.contributor.departmentEdwards Air Force Baseen
dc.date.issued1997-10en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractThe growing need to transmit larger telemetry streams from the receiving site to the processor location over greater distances is requiring newer and more creative techniques. This paper reports efforts to use Asynchronous Transfer Mode (ATM) technology and inverse multiplexing to provide an economical system to interface telemetry streams into the public network for reliable transmission. Cost savings are available immediately for programs that are willing to meet the synchronization criteria today. Lab testing has shown the feasibility of using cost efficient techniques for data transmission. This document describes the investigation that is currently underway that could provide a significant change to the way telemetry data is transmitted from receiver sites to data processing sites. Instead of using dedicated lines with dedicated bandwidth regardless of the program being supported, the approach that has been tested in a lab environment would allow the dynamic allocation of bandwidth using ATM over a variety of carrier services. The combination of ATM and inverse multiplexing allows telemetry data rates above 1.5 Megabits per second (Mbps) to be transmitted over multiple T1 (1.544 Mbps) lines. Previously, the only choice when data rates exceeded 1.5 Mbps was to use an entire DS-3 (45 Mbps). Now it is possible to transmit intermediate sized data rates (1.5 to 8 Mbps) by bonding multiple T1s to provide the desired data throughput.en
dc.subjectATMen
dc.subjectTelemetryen
dc.subjectInverse Multiplexingen
dc.subjectFlight Testen
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/607391en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.