Persistent Link:
http://hdl.handle.net/10150/605575
Title:
COMPARING BANDWIDTH REQUIREMENTS FOR DIGITAL BASEBAND SIGNALS
Author:
Houts, R. C.; Green, T. A.
Affiliation:
University of Alabama
Issue Date:
1972-10
Rights:
Copyright © International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
This paper describes the relative, bandwidth requirements of the common digital baseband signaling techniques used for data transmission. Bandwidth considerations include the percentage of total power in a properly encoded PN sequence passed at bandwidths of 0.5, 1, 2 and 3 times the reciprocal of the bit interval, T(b). The signals considered in this study are limited to the binary class, i.e., each decision at the receiver yields one bit of information, in contrast to signaling schemes which encode groups of bits into a given signal amplitude, phase shift, etc. The study compares such signaling techniques as delay modulation (DM), bipolar (BP), biternary (BT), duobinary (DB), pair selected ternary (PST), and time polarity control (TPC) in addition to the conventional NRZ, RZ and BIΦ schemes. It is shown that several of the signals can be transmitted over channels which block frequencies below 10% of the bit rate and still lose less than 5% of the total signal power. Based upon the dual consideration of a large number of regularily-spaced level transitions to assure synchronization plus a minimum of bandwidth and no dc response, it is concluded that DM and PST are the best choices.
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleCOMPARING BANDWIDTH REQUIREMENTS FOR DIGITAL BASEBAND SIGNALSen_US
dc.contributor.authorHouts, R. C.en
dc.contributor.authorGreen, T. A.en
dc.contributor.departmentUniversity of Alabamaen
dc.date.issued1972-10en
dc.rightsCopyright © International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractThis paper describes the relative, bandwidth requirements of the common digital baseband signaling techniques used for data transmission. Bandwidth considerations include the percentage of total power in a properly encoded PN sequence passed at bandwidths of 0.5, 1, 2 and 3 times the reciprocal of the bit interval, T(b). The signals considered in this study are limited to the binary class, i.e., each decision at the receiver yields one bit of information, in contrast to signaling schemes which encode groups of bits into a given signal amplitude, phase shift, etc. The study compares such signaling techniques as delay modulation (DM), bipolar (BP), biternary (BT), duobinary (DB), pair selected ternary (PST), and time polarity control (TPC) in addition to the conventional NRZ, RZ and BIΦ schemes. It is shown that several of the signals can be transmitted over channels which block frequencies below 10% of the bit rate and still lose less than 5% of the total signal power. Based upon the dual consideration of a large number of regularily-spaced level transitions to assure synchronization plus a minimum of bandwidth and no dc response, it is concluded that DM and PST are the best choices.en
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/605575en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.