INTEGRATING ENGINEERING UNIT CONVERSIONS AND SENSOR CALIBRATION INTO INSTRUMENTATION SETUP SOFTWARE

Persistent Link:
http://hdl.handle.net/10150/604520
Title:
INTEGRATING ENGINEERING UNIT CONVERSIONS AND SENSOR CALIBRATION INTO INSTRUMENTATION SETUP SOFTWARE
Author:
Kupferschmidt, Benjamin
Affiliation:
Teletronics Technology Corporation
Issue Date:
2007-10
Rights:
Copyright © held by the author; distribution rights International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
Historically, different aspects of the configuration of an airborne instrumentation system were specified in a variety of different software applications. Instrumentation setup software handled the definition of measurements and PCM Formats while separate applications handled pre-flight checkout, calibration and post-flight data analysis. This led to the manual entry of the same data multiple times. Industry standards such as TMATS strive to address this problem by creating a data-interchange format for passing setup information from one application to another. However, a better alternative is to input all of the relevant setup information about the sensor and the measurement when it is initially created in the instrumentation vendor’s software. Furthermore, an additional performance enhancement can be achieved by adding the ability to perform sensor calibration and engineering unit conversions to pre-flight data visualization software that is tightly coupled with the instrumentation setup software. All of the setup information can then be transferred to the ground station for post-flight processing and data reduction. Detailed reports can also be generated for each measurement. This paper describes the flow of data through an integrated airborne instrumentation setup application that allows sensors and measurements to be defined, acquired, calibrated and converted from raw counts to engineering units. The process of performing a sensor calibration, configuring engineering unit conversions, and importing calibration and transducer data sheets will also be discussed.
Keywords:
Engineering Unit Conversions; Sensor Calibration; XML; Data Interchange
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titleINTEGRATING ENGINEERING UNIT CONVERSIONS AND SENSOR CALIBRATION INTO INSTRUMENTATION SETUP SOFTWAREen_US
dc.contributor.authorKupferschmidt, Benjaminen
dc.contributor.departmentTeletronics Technology Corporationen
dc.date.issued2007-10en
dc.rightsCopyright © held by the author; distribution rights International Foundation for Telemeteringen
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractHistorically, different aspects of the configuration of an airborne instrumentation system were specified in a variety of different software applications. Instrumentation setup software handled the definition of measurements and PCM Formats while separate applications handled pre-flight checkout, calibration and post-flight data analysis. This led to the manual entry of the same data multiple times. Industry standards such as TMATS strive to address this problem by creating a data-interchange format for passing setup information from one application to another. However, a better alternative is to input all of the relevant setup information about the sensor and the measurement when it is initially created in the instrumentation vendor’s software. Furthermore, an additional performance enhancement can be achieved by adding the ability to perform sensor calibration and engineering unit conversions to pre-flight data visualization software that is tightly coupled with the instrumentation setup software. All of the setup information can then be transferred to the ground station for post-flight processing and data reduction. Detailed reports can also be generated for each measurement. This paper describes the flow of data through an integrated airborne instrumentation setup application that allows sensors and measurements to be defined, acquired, calibrated and converted from raw counts to engineering units. The process of performing a sensor calibration, configuring engineering unit conversions, and importing calibration and transducer data sheets will also be discussed.en
dc.subjectEngineering Unit Conversionsen
dc.subjectSensor Calibrationen
dc.subjectXMLen
dc.subjectData Interchangeen
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/604520en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.