Persistent Link:
http://hdl.handle.net/10150/581822
Title:
PCM to Ethernet: A Hybrid System Used to Certify the Next Generation of Data Transfer Technology
Author:
de Souza, Luiz Fernando; Rios, Domingos Henrique Beolchi; Willis, Stephen
Affiliation:
Embraer S. A.; Curtiss-Wright Controls Avionics & Electronics
Issue Date:
2012-10
Rights:
Copyright © held by the author; distribution rights International Foundation for Telemetering
Collection Information:
Proceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.
Publisher:
International Foundation for Telemetering
Journal:
International Telemetering Conference Proceedings
Abstract:
The last few years has witnessed the adoption of Ethernet technology in an increasing number of FTI applications. This is a result of both the growing acceptance within the community of the application of the technology, the availability of suitable hardware and the desire for increased parameters/higher data rates that PCM is unable to accommodate. However, migrating from an existing PCM based networked system to Ethernet is not typically just a case of exchanging the necessary hardware. There can be a range of other issues that require addressing such as ensuring determinism and realizing previous investment in hardware - this paper highlights and discusses several of these. This paper presents a case study of an FTI application on the Embraer Legacy 500 where a hybrid PCM and Ethernet configuration was implemented. One reason for this configuration was that it was necessary to prove to the Brazilian Aeronautical Agency that the data acquired using an Ethernet system was as reliable as that acquired using PCM. An additional reason was that such a system was seen as a safe stepping stone to a full Ethernet system for programs in the near future which are planning to fully migrate to an Ethernet architecture.
Sponsors:
International Foundation for Telemetering
ISSN:
0884-5123; 0074-9079
Additional Links:
http://www.telemetry.org/

Full metadata record

DC FieldValue Language
dc.language.isoen_USen
dc.titlePCM to Ethernet: A Hybrid System Used to Certify the Next Generation of Data Transfer Technologyen_US
dc.contributor.authorde Souza, Luiz Fernandoen
dc.contributor.authorRios, Domingos Henrique Beolchien
dc.contributor.authorWillis, Stephenen
dc.contributor.departmentEmbraer S. A.en
dc.contributor.departmentCurtiss-Wright Controls Avionics & Electronicsen
dc.date.issued2012-10en
dc.rightsCopyright © held by the author; distribution rights International Foundation for Telemeteringen_US
dc.description.collectioninformationProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection.en_US
dc.publisherInternational Foundation for Telemeteringen
dc.description.abstractThe last few years has witnessed the adoption of Ethernet technology in an increasing number of FTI applications. This is a result of both the growing acceptance within the community of the application of the technology, the availability of suitable hardware and the desire for increased parameters/higher data rates that PCM is unable to accommodate. However, migrating from an existing PCM based networked system to Ethernet is not typically just a case of exchanging the necessary hardware. There can be a range of other issues that require addressing such as ensuring determinism and realizing previous investment in hardware - this paper highlights and discusses several of these. This paper presents a case study of an FTI application on the Embraer Legacy 500 where a hybrid PCM and Ethernet configuration was implemented. One reason for this configuration was that it was necessary to prove to the Brazilian Aeronautical Agency that the data acquired using an Ethernet system was as reliable as that acquired using PCM. An additional reason was that such a system was seen as a safe stepping stone to a full Ethernet system for programs in the near future which are planning to fully migrate to an Ethernet architecture.en
dc.description.sponsorshipInternational Foundation for Telemeteringen
dc.identifier.issn0884-5123en
dc.identifier.issn0074-9079en
dc.identifier.urihttp://hdl.handle.net/10150/581822en
dc.identifier.journalInternational Telemetering Conference Proceedingsen
dc.typetexten
dc.typeProceedingsen
dc.relation.urlhttp://www.telemetry.org/en
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.