Persistent Link:
http://hdl.handle.net/10150/280042
Title:
Calibration and testing of the 6.5 m MMT adaptive optics system
Author:
Johnson, Robert L.
Issue Date:
2001
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
This dissertation describes the development, calibration, and testing of the adaptive optics system for the 6.5 m Multiple Mirror Telescope. By employing a deformable secondary mirror, the MMT adaptive optics system uniquely solves several problems typical of astronomical adaptive optics systems. Extra components are eliminated, improving throughput and reducing emissivity. Since the adaptive secondary is integral to the telescope, a corrected beam is presented to any instrument mounted at Cassegrain focus. The testing of an adaptive mirror, which is large and convex, poses a new and difficult problem. I present a test apparatus that allows complete calibration and operation, in closed-loop, of the entire adaptive optics system in the laboratory. The test apparatus replicates the optical path of the telescope with a wavefront error of less than 500 nm RMS. To simulate atmospheric turbulence, machined acrylic plates are included. A phase-shifting interferometer allows calibration of the Shack-Hartmann wavefront sensor and reconstruction algorithms; comparisons agree to one-third of the root-mean-square wavefront. First, techniques were developed to align the apparatus and measure residual aberration. Then, the wavefront sensor was calibrated by measuring its response to introduced tilt. Lastly, a Fourier wave-optics approach was used to produce a modal wavefront reconstructor. The adaptive secondary mirror uses electro-magnetic force actuators. Capacitive position sensors are placed at each actuator to permit control of the mirror shape without measuring the reflected wavefront. These sensors have nanometer resolution, but require calibration. To calibrate the sensors, I developed a small optical instrument which measures the thickness of transparent films to an absolute accuracy of 5 nm with a precision of 2 nm. The device has applications far beyond the scope of this research. Twenty-four of these optical gap sensors have been built to calibrate the 336 capacitive sensors on the adaptive secondary mirror. Mirror displacements measured using gap sensors and a phase-shifting interferometer agree to 2 percent of the displacement. The gap sensors allow for quick and accurate calibration of the capacitive sensors without the difficulty of installing an interferometer on the telescope.
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Physics, Astronomy and Astrophysics.; Physics, Optics.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Graduate College; Optical Sciences
Degree Grantor:
University of Arizona
Advisor:
Angel, Roger P.

Full metadata record

DC FieldValue Language
dc.language.isoen_USen_US
dc.titleCalibration and testing of the 6.5 m MMT adaptive optics systemen_US
dc.creatorJohnson, Robert L.en_US
dc.contributor.authorJohnson, Robert L.en_US
dc.date.issued2001en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractThis dissertation describes the development, calibration, and testing of the adaptive optics system for the 6.5 m Multiple Mirror Telescope. By employing a deformable secondary mirror, the MMT adaptive optics system uniquely solves several problems typical of astronomical adaptive optics systems. Extra components are eliminated, improving throughput and reducing emissivity. Since the adaptive secondary is integral to the telescope, a corrected beam is presented to any instrument mounted at Cassegrain focus. The testing of an adaptive mirror, which is large and convex, poses a new and difficult problem. I present a test apparatus that allows complete calibration and operation, in closed-loop, of the entire adaptive optics system in the laboratory. The test apparatus replicates the optical path of the telescope with a wavefront error of less than 500 nm RMS. To simulate atmospheric turbulence, machined acrylic plates are included. A phase-shifting interferometer allows calibration of the Shack-Hartmann wavefront sensor and reconstruction algorithms; comparisons agree to one-third of the root-mean-square wavefront. First, techniques were developed to align the apparatus and measure residual aberration. Then, the wavefront sensor was calibrated by measuring its response to introduced tilt. Lastly, a Fourier wave-optics approach was used to produce a modal wavefront reconstructor. The adaptive secondary mirror uses electro-magnetic force actuators. Capacitive position sensors are placed at each actuator to permit control of the mirror shape without measuring the reflected wavefront. These sensors have nanometer resolution, but require calibration. To calibrate the sensors, I developed a small optical instrument which measures the thickness of transparent films to an absolute accuracy of 5 nm with a precision of 2 nm. The device has applications far beyond the scope of this research. Twenty-four of these optical gap sensors have been built to calibrate the 336 capacitive sensors on the adaptive secondary mirror. Mirror displacements measured using gap sensors and a phase-shifting interferometer agree to 2 percent of the displacement. The gap sensors allow for quick and accurate calibration of the capacitive sensors without the difficulty of installing an interferometer on the telescope.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectPhysics, Astronomy and Astrophysics.en_US
dc.subjectPhysics, Optics.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.disciplineOptical Sciencesen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.advisorAngel, Roger P.en_US
dc.identifier.proquest3010192en_US
dc.identifier.bibrecord.b41611111en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.