Persistent Link:
http://hdl.handle.net/10150/279977
Title:
Modeling two-dimensional infiltration from furrows
Author:
Pimental-Lopez, Jose
Issue Date:
2002
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
Numerical simulations were performed to study two-dimensional infiltration from furrows. The simulations were carried out using the models SWMS_2D, HYDRUS-2D and HYDRUS-1D. The first model was used to evaluate the individual effect of soil and furrow parameters on cumulative infiltration and deep seepage. Cumulative infiltration was found to be more sensitive to saturated hydraulic conductivity, wetted perimeter and furrow spacing than the other parameters for relatively long times, while cumulative deep seepage was more sensitive to the same parameters except to the furrow spacing. It was verified that two-dimensional cumulative infiltration can be approximated using one-dimensional models, for example HYDRUS-1D, by combining the vertical and horizontal infiltrations. The two-dimensional cumulative infiltration is underpredicted by no more than 35% using this calculation. When steady state is reached the steady infiltration rate may be linearly related to the depth of the furrow. As a result, steady infiltration rate is dependent only on type of soil, water depth in the furrow and furrow width. Broocks-Corey soil hydraulic parameters were matched to the van Genuchten parameters by four different procedures. The method based on matching sorptivities produced the closest results to the van Genuchten solution for one- and two-dimensional cumulative infiltration. However, cumulative deep seepage was not accurately simulated. The SCS infiltration parameters were also matched but using an inverse problem methodology. The parameters obtained described cumulative infiltration reasonably well.
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Agriculture, Soil Science.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Graduate College; Soil, Water and Environmental Science
Degree Grantor:
University of Arizona
Advisor:
Warrick, Arthur W.

Full metadata record

DC FieldValue Language
dc.language.isoen_USen_US
dc.titleModeling two-dimensional infiltration from furrowsen_US
dc.creatorPimental-Lopez, Joseen_US
dc.contributor.authorPimental-Lopez, Joseen_US
dc.date.issued2002en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractNumerical simulations were performed to study two-dimensional infiltration from furrows. The simulations were carried out using the models SWMS_2D, HYDRUS-2D and HYDRUS-1D. The first model was used to evaluate the individual effect of soil and furrow parameters on cumulative infiltration and deep seepage. Cumulative infiltration was found to be more sensitive to saturated hydraulic conductivity, wetted perimeter and furrow spacing than the other parameters for relatively long times, while cumulative deep seepage was more sensitive to the same parameters except to the furrow spacing. It was verified that two-dimensional cumulative infiltration can be approximated using one-dimensional models, for example HYDRUS-1D, by combining the vertical and horizontal infiltrations. The two-dimensional cumulative infiltration is underpredicted by no more than 35% using this calculation. When steady state is reached the steady infiltration rate may be linearly related to the depth of the furrow. As a result, steady infiltration rate is dependent only on type of soil, water depth in the furrow and furrow width. Broocks-Corey soil hydraulic parameters were matched to the van Genuchten parameters by four different procedures. The method based on matching sorptivities produced the closest results to the van Genuchten solution for one- and two-dimensional cumulative infiltration. However, cumulative deep seepage was not accurately simulated. The SCS infiltration parameters were also matched but using an inverse problem methodology. The parameters obtained described cumulative infiltration reasonably well.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectAgriculture, Soil Science.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.disciplineSoil, Water and Environmental Scienceen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.advisorWarrick, Arthur W.en_US
dc.identifier.proquest3050344en_US
dc.identifier.bibrecord.b42728204en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.