Kinematics, dynamics, and mechanics of Laramide deformation, Colorado Plateau, Utah and Colorado

Persistent Link:
http://hdl.handle.net/10150/279791
Title:
Kinematics, dynamics, and mechanics of Laramide deformation, Colorado Plateau, Utah and Colorado
Author:
Bump, Alexander Pearsall
Issue Date:
2001
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
The structure of the northern Colorado Plateau is dominated by a series of fault-bounded basement-cored uplifts: the Kaibab, Circle Cliffs, Miners Mountain, San Rafael Swell, Monument, and Uncompahgre uplifts. Outcrop-scale structures, including jointed Eshelby inclusions, stylolites, echelon vein arrays, deformation bands and meso-scale faults, suggest that the Monument and San Rafael Swell were formed by NW-SE-directed shortening while the other four uplifts were formed by SW-NE-directed shortening. Elastic modeling demonstrates that the simultaneous shortening in two directions is a result of deformation by a three-dimensional stress field where the magnitude of σ₂ approaches that of σ₁. Geologically, σ₁ is attributed to coupling between the horizontally-subducting Farallon slab and the North American plate, while the elevated values of σ₂ are attributed to far-field stresses generated by the topographically high Sevier thrust belt, located on the western edge of the Plateau. Mechanically, basment-cored uplift systems are controlled by the relative strengths of the uplift-bounding faults, which is determined by several factors, including dip, coefficient of friction, and pore-fluid pressure. Reverse slip may raise a fault's effective strength by building topography and thus increasing the weight of the hangingwall. A model is developed in which faults "slip strengthen," and promoting transfer of deformation to other, now weaker faults and broadening the region of deformation. In the broader picture, tectonic force may be applied to the edge of the system, (e.g., continental collision) or by basal traction (e.g., flat-slab subduction). In the former case shear stress on the basal detachment retards shortening. Total basal shear force (stress multiplied by area) grows with distance toward the foreland at the expense of tectonic force available to drive slip on fault ramps. Assuming quasi-uniform crustal strength, the greatest deformation develops in the hinterland where tectonic force is highest. Alternatively, tectonic force may be applied as a basal traction (as in the Laramide orogeny), in which case basal shear drives shortening and total shear force/deformational intensity grow with distance toward the foreland. This offers a natural explanation for why the Colorado Plateau, which occupies the hinterland of the Laramide orogen, is the least deformed part of the orogen.
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Geology.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Graduate College; Earth sciences
Degree Grantor:
University of Arizona
Advisor:
Davis, George H.

Full metadata record

DC FieldValue Language
dc.language.isoen_USen_US
dc.titleKinematics, dynamics, and mechanics of Laramide deformation, Colorado Plateau, Utah and Coloradoen_US
dc.creatorBump, Alexander Pearsallen_US
dc.contributor.authorBump, Alexander Pearsallen_US
dc.date.issued2001en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractThe structure of the northern Colorado Plateau is dominated by a series of fault-bounded basement-cored uplifts: the Kaibab, Circle Cliffs, Miners Mountain, San Rafael Swell, Monument, and Uncompahgre uplifts. Outcrop-scale structures, including jointed Eshelby inclusions, stylolites, echelon vein arrays, deformation bands and meso-scale faults, suggest that the Monument and San Rafael Swell were formed by NW-SE-directed shortening while the other four uplifts were formed by SW-NE-directed shortening. Elastic modeling demonstrates that the simultaneous shortening in two directions is a result of deformation by a three-dimensional stress field where the magnitude of σ₂ approaches that of σ₁. Geologically, σ₁ is attributed to coupling between the horizontally-subducting Farallon slab and the North American plate, while the elevated values of σ₂ are attributed to far-field stresses generated by the topographically high Sevier thrust belt, located on the western edge of the Plateau. Mechanically, basment-cored uplift systems are controlled by the relative strengths of the uplift-bounding faults, which is determined by several factors, including dip, coefficient of friction, and pore-fluid pressure. Reverse slip may raise a fault's effective strength by building topography and thus increasing the weight of the hangingwall. A model is developed in which faults "slip strengthen," and promoting transfer of deformation to other, now weaker faults and broadening the region of deformation. In the broader picture, tectonic force may be applied to the edge of the system, (e.g., continental collision) or by basal traction (e.g., flat-slab subduction). In the former case shear stress on the basal detachment retards shortening. Total basal shear force (stress multiplied by area) grows with distance toward the foreland at the expense of tectonic force available to drive slip on fault ramps. Assuming quasi-uniform crustal strength, the greatest deformation develops in the hinterland where tectonic force is highest. Alternatively, tectonic force may be applied as a basal traction (as in the Laramide orogeny), in which case basal shear drives shortening and total shear force/deformational intensity grow with distance toward the foreland. This offers a natural explanation for why the Colorado Plateau, which occupies the hinterland of the Laramide orogen, is the least deformed part of the orogen.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectGeology.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.disciplineEarth sciencesen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.advisorDavis, George H.en_US
dc.identifier.proquest3016502en_US
dc.identifier.bibrecord.b41939347en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.