Miniature Microscope Design And Construction Based On Tilted Rotationally Asymmetric Printed Lenses

Persistent Link:
http://hdl.handle.net/10150/194489
Title:
Miniature Microscope Design And Construction Based On Tilted Rotationally Asymmetric Printed Lenses
Author:
Rogers, Jeremy David
Issue Date:
2006
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
Successful treatment of many types of cancer is improved when early detection is possible. One method of early detection is microscopic inspection of the tissue at risk. Microscopic inspection can be performed by extracting a biopsy and using traditional microscopes, but biopsy is painful and inconvenient which limits its use. An alternative is in vivo microscopy using an endoscope or microendoscopy. This dissertation describes the design, construction, and evaluation of a miniature microscope or microendoscope based on new microfabrication technologies.All components typically found in a traditional bench-top microscope were designed and built on a miniature scale. The objective was comprised of one planoconvex spherical glass lens and three printed microlenses. The printed lenses were patterned using grayscale lithography in a custom engineered photosensitive hybrid sol-gel glass material. Illumination was delivered by high-brightness Light Emitting Diodes (LEDs) via multimode fiber. The design incorporated a custom imaging detector and a Micro-Electrical-Mechanical-Systems (MEMS) actuator for optical sectioning using structured illumination. The opto-mechanical system is designed using a new concept called "zero alignment assembly" in which the lens elements snap into place and are constrained to a precise position with tolerances tighter than the optical tolerances. This scheme requires no post-assembly alignment or adjustment and simplifies system assembly. The miniature microscope was designed to image in several modes including reflectance, fluorescence, and using structured illumination for optical sectioning. A unique optical design incorporated tilted elements to remove ghost images and internal reflections from the image plane. This design enabled microscopic imaging of extremely low reflectance samples like tissue where the "in-focus" component of the object reflects only 0.04% of the illumination. The miniature microscope was built and tested by imaging a variety of test objects including cancer tissue phantoms and pig tissue. The results demonstrated the successful implementation of many new microfabrication technologies and design concepts to build a working prototype miniature microscope measuring only 3x4x15 mm capable of imaging cellular structure of tissue in reflectance or flourescence.
Type:
text; Electronic Dissertation
Degree Name:
PhD
Degree Level:
doctoral
Degree Program:
Optical Sciences; Graduate College
Degree Grantor:
University of Arizona
Advisor:
Descour, Michael R
Committee Chair:
Descour, Michael R

Full metadata record

DC FieldValue Language
dc.language.isoENen_US
dc.titleMiniature Microscope Design And Construction Based On Tilted Rotationally Asymmetric Printed Lensesen_US
dc.creatorRogers, Jeremy Daviden_US
dc.contributor.authorRogers, Jeremy Daviden_US
dc.date.issued2006en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractSuccessful treatment of many types of cancer is improved when early detection is possible. One method of early detection is microscopic inspection of the tissue at risk. Microscopic inspection can be performed by extracting a biopsy and using traditional microscopes, but biopsy is painful and inconvenient which limits its use. An alternative is in vivo microscopy using an endoscope or microendoscopy. This dissertation describes the design, construction, and evaluation of a miniature microscope or microendoscope based on new microfabrication technologies.All components typically found in a traditional bench-top microscope were designed and built on a miniature scale. The objective was comprised of one planoconvex spherical glass lens and three printed microlenses. The printed lenses were patterned using grayscale lithography in a custom engineered photosensitive hybrid sol-gel glass material. Illumination was delivered by high-brightness Light Emitting Diodes (LEDs) via multimode fiber. The design incorporated a custom imaging detector and a Micro-Electrical-Mechanical-Systems (MEMS) actuator for optical sectioning using structured illumination. The opto-mechanical system is designed using a new concept called "zero alignment assembly" in which the lens elements snap into place and are constrained to a precise position with tolerances tighter than the optical tolerances. This scheme requires no post-assembly alignment or adjustment and simplifies system assembly. The miniature microscope was designed to image in several modes including reflectance, fluorescence, and using structured illumination for optical sectioning. A unique optical design incorporated tilted elements to remove ghost images and internal reflections from the image plane. This design enabled microscopic imaging of extremely low reflectance samples like tissue where the "in-focus" component of the object reflects only 0.04% of the illumination. The miniature microscope was built and tested by imaging a variety of test objects including cancer tissue phantoms and pig tissue. The results demonstrated the successful implementation of many new microfabrication technologies and design concepts to build a working prototype miniature microscope measuring only 3x4x15 mm capable of imaging cellular structure of tissue in reflectance or flourescence.en_US
dc.typetexten_US
dc.typeElectronic Dissertationen_US
thesis.degree.namePhDen_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineOptical Sciencesen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.advisorDescour, Michael Ren_US
dc.contributor.chairDescour, Michael Ren_US
dc.contributor.committeememberGmitro, Arten_US
dc.contributor.committeememberShack, Rolanden_US
dc.identifier.proquest1960en_US
dc.identifier.oclc659746536en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.