An experimental and theoretical investigation of waveguide scatter, with applications to solution-deposited silica-titania planar waveguides.

Persistent Link:
http://hdl.handle.net/10150/186042
Title:
An experimental and theoretical investigation of waveguide scatter, with applications to solution-deposited silica-titania planar waveguides.
Author:
Roncone, Ronald Louis.
Issue Date:
1992
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
A theoretical and experimental investigation of scatter from surface roughness and core refractive index fluctuations in planar waveguides was performed, with an emphasis placed on applications in solution-deposited SiO₂-TiO₂ (silica titania) planar waveguiding systems. A perturbation theory was used to model TE₀ mode scattering from surface and volume microstructure, and to predict attenuation when provided with the necessary waveguide and scattering parameters. Final forms for the equations predicting surface and volume scatter losses into the cover and substrate regions of the waveguides were provided. The rather complex perturbation theory model of surface scatter was compared to a very simple, intuitive model based on the Rayleigh criterion. The two models were shown to predict surface induced attenuation values which were in very close agreement when the guided mode propagation angle approached 90°. Thus, the simple model was shown to be adequate for predicting TE₀ mode surface scattering losses for waveguides which were very thick, and/or possessed a low refractive index. Considerable emphasis was placed on providing a simple, physical picture of guided mode scattering, utilizing rays to represent the scattered light. Following the development of this technique, it was utilized to explain the origins of interference peaks in surface scattered radiation at certain values of film thickness. Solution chemistry and processing methodologies for 50:50 mol% and 35:65 mol% SiO₂-TiO₂ sol-gel films, yielding high quality, amorphous, glass waveguides, were discussed. Attenuation in the 50:50 mol% films was 1-2 dB/cm, while attenuation in the 35:65 mol% films was 0.3-0.5 dB/cm, at λ = 0.6328 μm. Absorption in these films was negligible. Waveguide losses were measured by transferring the scattered streak to a remote image plane (using a coherent fiber bundle) and scanning it using an automated, stepper-motor controlled, apertured photomultiplier tube. Testing and calibration techniques were described in detail. We found that surface-induced scattering was the dominant loss mechanism in the 35:65 mol% SiO₂-TiO₂ films. Surface roughnesses of the sol-gel films, measured using Atomic Force Microscopy, ranged from about 2-5 A rms, with correlation lengths from about 0.05-0.75 μm.
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Physics.; Optics and photonics.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Optical Sciences; Graduate College
Degree Grantor:
University of Arizona
Committee Chair:
Burke, James

Full metadata record

DC FieldValue Language
dc.language.isoenen_US
dc.titleAn experimental and theoretical investigation of waveguide scatter, with applications to solution-deposited silica-titania planar waveguides.en_US
dc.creatorRoncone, Ronald Louis.en_US
dc.contributor.authorRoncone, Ronald Louis.en_US
dc.date.issued1992en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractA theoretical and experimental investigation of scatter from surface roughness and core refractive index fluctuations in planar waveguides was performed, with an emphasis placed on applications in solution-deposited SiO₂-TiO₂ (silica titania) planar waveguiding systems. A perturbation theory was used to model TE₀ mode scattering from surface and volume microstructure, and to predict attenuation when provided with the necessary waveguide and scattering parameters. Final forms for the equations predicting surface and volume scatter losses into the cover and substrate regions of the waveguides were provided. The rather complex perturbation theory model of surface scatter was compared to a very simple, intuitive model based on the Rayleigh criterion. The two models were shown to predict surface induced attenuation values which were in very close agreement when the guided mode propagation angle approached 90°. Thus, the simple model was shown to be adequate for predicting TE₀ mode surface scattering losses for waveguides which were very thick, and/or possessed a low refractive index. Considerable emphasis was placed on providing a simple, physical picture of guided mode scattering, utilizing rays to represent the scattered light. Following the development of this technique, it was utilized to explain the origins of interference peaks in surface scattered radiation at certain values of film thickness. Solution chemistry and processing methodologies for 50:50 mol% and 35:65 mol% SiO₂-TiO₂ sol-gel films, yielding high quality, amorphous, glass waveguides, were discussed. Attenuation in the 50:50 mol% films was 1-2 dB/cm, while attenuation in the 35:65 mol% films was 0.3-0.5 dB/cm, at λ = 0.6328 μm. Absorption in these films was negligible. Waveguide losses were measured by transferring the scattered streak to a remote image plane (using a coherent fiber bundle) and scanning it using an automated, stepper-motor controlled, apertured photomultiplier tube. Testing and calibration techniques were described in detail. We found that surface-induced scattering was the dominant loss mechanism in the 35:65 mol% SiO₂-TiO₂ films. Surface roughnesses of the sol-gel films, measured using Atomic Force Microscopy, ranged from about 2-5 A rms, with correlation lengths from about 0.05-0.75 μm.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectPhysics.en_US
dc.subjectOptics and photonics.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineOptical Sciencesen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.chairBurke, Jamesen_US
dc.contributor.committeememberZelinski, Brianen_US
dc.identifier.proquest9307701en_US
dc.identifier.oclc702680520en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.