Joint geometry parameter effects on deformability and strength of jointed rock masses at the two dimensional level.

Persistent Link:
http://hdl.handle.net/10150/185975
Title:
Joint geometry parameter effects on deformability and strength of jointed rock masses at the two dimensional level.
Author:
Ucpirti, Hasan.
Issue Date:
1992
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
In this study, the pre-failure behavior of a jointed rock block is modeled by an incrementally linear elastic anisotropic constitutive model (using an orthotropic model in 2D). In order to estimate the parameters in the constitutive model, a new technique was used in this dissertation. A 2D joint geometry generation code was used to generate finite size actual joint networks in 2D rock blocks. A 2D distinct element code (UDEC) was chosen as the stress analysis tool in this study. Fictitious joints were introduced into the rock blocks which contain finite size actual joints to discretize the problem domain into polygons. A number of stress analyses of rock blocks which contain only persistent joints were performed to estimate representative values for mechanical properties of fictitious joints to simulate the intact rock behavior. Finally, the rock blocks having different deterministic actual joint configurations with fictitious joints were subjected to 2D stress analysis under various stress paths using UDEC. Results of these stress analyses were used to estimate the deformational and strength properties of these rock blocks. Influence of joint geometry parameters on the mechanical properties of jointed rock blocks were found to be very significant. Plots are given to show how mechanical properties of rock blocks vary with joint intensity and joint size/block size for different joint orientations. These plots can also be used to estimate REV (Representative Elementary Volume) size and REV properties for rock masses. It is important to note that these REV property values depend on the chosen constitutive models for intact rock and joints. The concept of fracture tensor is reviewed at the 2D level. Relationships between the mechanical properties of jointed rock blocks and the fracture tensor parameters (its first invariant and components) are established. These relationships can be used to estimate the parameters of the chosen constitutive model for the rock block. This constitutive model has captured both scale dependent and anisotropic behaviors of rock masses. The possibility of obtaining the equivalent continuum properties (REV properties) of jointed rock blocks is explored by using the aforementioned relationships. (Abstract shortened by UMI.)
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Dissertations, Academic.; Mining engineering.; Civil engineering.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Mining and Geological Engineering; Graduate College
Degree Grantor:
University of Arizona
Committee Chair:
Kulatilake, Pinnaduwa H.S.W.

Full metadata record

DC FieldValue Language
dc.language.isoenen_US
dc.titleJoint geometry parameter effects on deformability and strength of jointed rock masses at the two dimensional level.en_US
dc.creatorUcpirti, Hasan.en_US
dc.contributor.authorUcpirti, Hasan.en_US
dc.date.issued1992en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractIn this study, the pre-failure behavior of a jointed rock block is modeled by an incrementally linear elastic anisotropic constitutive model (using an orthotropic model in 2D). In order to estimate the parameters in the constitutive model, a new technique was used in this dissertation. A 2D joint geometry generation code was used to generate finite size actual joint networks in 2D rock blocks. A 2D distinct element code (UDEC) was chosen as the stress analysis tool in this study. Fictitious joints were introduced into the rock blocks which contain finite size actual joints to discretize the problem domain into polygons. A number of stress analyses of rock blocks which contain only persistent joints were performed to estimate representative values for mechanical properties of fictitious joints to simulate the intact rock behavior. Finally, the rock blocks having different deterministic actual joint configurations with fictitious joints were subjected to 2D stress analysis under various stress paths using UDEC. Results of these stress analyses were used to estimate the deformational and strength properties of these rock blocks. Influence of joint geometry parameters on the mechanical properties of jointed rock blocks were found to be very significant. Plots are given to show how mechanical properties of rock blocks vary with joint intensity and joint size/block size for different joint orientations. These plots can also be used to estimate REV (Representative Elementary Volume) size and REV properties for rock masses. It is important to note that these REV property values depend on the chosen constitutive models for intact rock and joints. The concept of fracture tensor is reviewed at the 2D level. Relationships between the mechanical properties of jointed rock blocks and the fracture tensor parameters (its first invariant and components) are established. These relationships can be used to estimate the parameters of the chosen constitutive model for the rock block. This constitutive model has captured both scale dependent and anisotropic behaviors of rock masses. The possibility of obtaining the equivalent continuum properties (REV properties) of jointed rock blocks is explored by using the aforementioned relationships. (Abstract shortened by UMI.)en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectDissertations, Academic.en_US
dc.subjectMining engineering.en_US
dc.subjectCivil engineering.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplineMining and Geological Engineeringen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.chairKulatilake, Pinnaduwa H.S.W.en_US
dc.contributor.committeememberKemeny, John M.en_US
dc.contributor.committeememberBudhu, Muniramen_US
dc.contributor.committeememberDaemen, Jaak J.K.en_US
dc.contributor.committeememberLever, Paulen_US
dc.identifier.proquest9303317en_US
dc.identifier.oclc713380041en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.