LATTICE DEFECT STUDIES OF HIGH QUALITY SINGLE CRYSTAL PLATINUM AND PALLADIUM.

Persistent Link:
http://hdl.handle.net/10150/184115
Title:
LATTICE DEFECT STUDIES OF HIGH QUALITY SINGLE CRYSTAL PLATINUM AND PALLADIUM.
Author:
KHELLAF, ABDALLAH.
Issue Date:
1987
Publisher:
The University of Arizona.
Rights:
Copyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.
Abstract:
An improved quenching technique is described. This technique allows samples to be quenched at slow quenching rates without introducing unwanted dislocations during quench. High quality platinum single crystals 1 mm in diameter have been quenched from temperatures between 900°C and 1550°C using this technique. The data have been analysed and discussed using a sink model for vacancy loss proposed by Emrick. The formation energy was found to be (1.30 ± 0.03) eV. The entropy of formation and the concentration of vacancies at the melting point have been determined to be respectively (0.42 ± 0.11)k and (9.4 ± 0.7)10⁻⁴. High purity palladium single crystals have also been quenched using the same technique. Due to the need for a temperature scale, measurements of the electrical resistance of an ultra pure palladium single crystal have been made to a temperature within 100°C of the melting point. These, along with measurements of the liquid palladium resistivity, are reported. The results are discussed and compared to previously reported values.
Type:
text; Dissertation-Reproduction (electronic)
Keywords:
Crystals -- Defects.
Degree Name:
Ph.D.
Degree Level:
doctoral
Degree Program:
Physics; Graduate College
Degree Grantor:
University of Arizona
Advisor:
Emrick, Roy M.

Full metadata record

DC FieldValue Language
dc.language.isoenen_US
dc.titleLATTICE DEFECT STUDIES OF HIGH QUALITY SINGLE CRYSTAL PLATINUM AND PALLADIUM.en_US
dc.creatorKHELLAF, ABDALLAH.en_US
dc.contributor.authorKHELLAF, ABDALLAH.en_US
dc.date.issued1987en_US
dc.publisherThe University of Arizona.en_US
dc.rightsCopyright © is held by the author. Digital access to this material is made possible by the University Libraries, University of Arizona. Further transmission, reproduction or presentation (such as public display or performance) of protected items is prohibited except with permission of the author.en_US
dc.description.abstractAn improved quenching technique is described. This technique allows samples to be quenched at slow quenching rates without introducing unwanted dislocations during quench. High quality platinum single crystals 1 mm in diameter have been quenched from temperatures between 900°C and 1550°C using this technique. The data have been analysed and discussed using a sink model for vacancy loss proposed by Emrick. The formation energy was found to be (1.30 ± 0.03) eV. The entropy of formation and the concentration of vacancies at the melting point have been determined to be respectively (0.42 ± 0.11)k and (9.4 ± 0.7)10⁻⁴. High purity palladium single crystals have also been quenched using the same technique. Due to the need for a temperature scale, measurements of the electrical resistance of an ultra pure palladium single crystal have been made to a temperature within 100°C of the melting point. These, along with measurements of the liquid palladium resistivity, are reported. The results are discussed and compared to previously reported values.en_US
dc.typetexten_US
dc.typeDissertation-Reproduction (electronic)en_US
dc.subjectCrystals -- Defects.en_US
thesis.degree.namePh.D.en_US
thesis.degree.leveldoctoralen_US
thesis.degree.disciplinePhysicsen_US
thesis.degree.disciplineGraduate Collegeen_US
thesis.degree.grantorUniversity of Arizonaen_US
dc.contributor.advisorEmrick, Roy M.en_US
dc.identifier.proquest8715715en_US
dc.identifier.oclc698485096en_US
All Items in UA Campus Repository are protected by copyright, with all rights reserved, unless otherwise indicated.